Epson EMP-715 Owner's Manual page 70

Top Sub Menu
Menu
Adva Language
nced
Startup Screen
Color Setting
Rear Proj.
Ceiling
Reset
About
Reset Execute
all
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
· The information menu displays the status of the input source settings being projected.
68 - Menu Operations
Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language
from the language selection menu displayed.
Displays the user logo during warm-up after the power has
been switched on.
· The user logo must be registered and set up before it can be
amended.
Adjusts the color temperature (*) of the image.
Color temperature: Sets the color temperature.
Press the [Enter] button and make the setting on the color
setup menu displayed.
RGB: Sets the strength of the RGB colors (red, green and
blue.)
· Press the [Enter] button, select the R (red), G (green) and B
(blue) items on the color setup menu displayed, and then
make the necessary setting.
· Observe the status of the screen when adjusting the settings.
Set at [ON] to project images onto a half-transparent screen
from the rear. The projected image will be inverted.
The projected image will be inverted up, down, left and right
when this is set at [ON].
Returns all advanced setting menu adjustment values to the
default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Select [Reset All] to return all image and sound values to the
default settings.
(Displays the current settings)
Returns all items in the set-up menus to the default values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Execute the [Reset] function from each individual sub menu
to return the image and sound settings to the default values
for each menu.
· The User's Logo Capture, Lamp ON Time, language and
BNC settings cannot be restored to the default values.
Function Default Value
English
ON
Color
temperature
OFF
OFF
-
-
-