Problems With Easymp Images; Problems When Using The Easymp Software - Epson EMP-715 Owner's Manual

The projector will not switch off (after the [Power] button has
been pressed)
G
OFF
G

Problems with EasyMP images

G

Problems when using the EasyMP Software

G
G
G
Point
If an abnormality remains after checking the results of the above inspections, disconnect
the Power Plug from the socket and contact your dealer or nearest address provided at
page 121.
Is the Operation Indicator illuminated in orange?
The projector has been designed so that the Operation Indicator is not
extinguished even when the power has been switched off.
The Operation Indicator will be extinguished when the Power Plug
has been disconnected from the socket.
The fan will not cease operations.
The cool-down process (to allow the projector lamp to cool down; the
operation indicator will blink in orange) will be performed after the
power has been switch off by pressing the [Power] button. The
operation indicator will be illuminated in orange when this has been
completed, so remove the power plug from the socket at this point.
*The amount of time required for the cool-down process will depend
on the external temperature.
The image acts strangely (distorted)
A jpeg image with a resolution that cannot be displayed normally is
being used. If the image is not displayed normally, adjust the
resolution so that the vertical lines are double 8-pixels and the
horizontal lines are double 8-pixels or double 32-pixels. There should
be no trouble with scenario files created with the EasyMP Software or
images with a normal resolution (VGA, XGA.)
PowerPoint files (.ppt) will not be displayed in the file window.
Files created with PowerPoint 95 and files saved in the PowerPoint 95
format cannot be edited with the EasyMP Software. These files must
first be resaved in the PowerPoint 97 or PowerPoint 2000 formats
before they can be used.
Not possible to paste PowerPoint files (.ppt) onto scenarios or display
thumbnails.
It could be that the MS-Office jpeg converter has not been installed.
Displays the [Converters and Files] - [Graphic Filter] option from the
Office97 installer, and then install it all or only the jpeg filter (the jpeg
filter is installed with the standard Office2000 installation.)
Created scenarios files cannot be edited.
Scenario files (.sit) that have been transferred across to the memory
card cannot be edited. Use the scenario data (.sic) temporarily saved
in the EasyMP Software.
When the Indicators Provide No Help - 107