Epson EMP-715 Owner's Manual page 83

G Setting up the display conditions
This sets up the list preview and scenario playback display conditions.
1
Align the cursor with the required folder or scenario, and then press the [Esc] button.
The folder or scenario will remain selected and the menu on the left-hand side will be
enabled for use.
2
Align the cursor with [Options], and then press the [Enter] button.
The display condition setup screen will be displayed.
Select
3
Set up the relevant items
Select the parameter for the required item, and then press the [Enter] button to enable
modification.
The files will be enlarged and displayed one-by-one if the [Execute] button is selected on
this screen.
Return to the file
list display
Re-execute
Screen switching time
Display order
Select background color
Selected folder
Sets whether to repeat enlargement and display or not.
* Only this item will be displayed when a scenario file has been
selected.
Sets the amount of time before proceeding to the next screen. When
this parameter is not specified, the next screen is displayed when the
[Enter] button is pressed.
Sets the sequence in which the files are to be displayed.
Sets the color of the background to be displayed.
Set the item
parameter
Viewing EasyMP files - 81