76 - Viewing Easymp Files - Epson EMP-715 Owner's Manual

I Viewing EasyMP files
It is possible to view the folders and files stored on the memory card with EasyMP.
It is possible to display a list of files contained within the memory card inserted in the projector,
and enlarge each image for confirmation purposes (preview).
The preview function can be used on the following image formats:
· jpg files saved with the capture function.
· jpg files saved during scenario creation.
· SXGA (1024 x 1280) or lower bitmap (bmp) files.
· SXGA (1024 x 1280) or lower jpg files (excluding certain special jpg formats).
Point
· Only 24-bit color bmp files can be viewed with the preview function. 256 color files cannot
normally be displayed.
· There are cases where jpg files saved with digital cameras and other software cannot be
previewed.
· Displays is not possible when the extension log is [jpeg].
· The capture function is executed with the [Image Capture] function on the projector's cap-
ture menu. (see page 69)
· Create scenarios with the special [EMP Slide Maker] software beforehand on the com-
puter in use .(see page 87)
· Due to the characteristics of jpeg files, if the compression ratio is high, the image may not
be very sharp when it is displayed.

76 - Viewing EasyMP files