Replacing The Air Filter; Replacement Method - Epson EMP-715 Owner's Manual

I I I I Replacing the Air Filter

Replacement method

1
Switch off the power supply, allow the projector to cool down, and then disconnect the
Power Cord. The amount of time required for the projector to cool down will depend
on the surrounding temperature.
2
Raise the air filter with a screwdriver or similar object to remove it.
Point
Ensure that the projector is stood on its end when replacing the Air Filter to prevent the dirt
and dust from penetrating inside.
3
Set a new Air Filter in place.
Point
· Slip the clip in place first, and then press the other side to set it in place.
· Dispose of used air filters in accordance with local disposal regulations.

110 - Replacing the Air Filter