Replacing The Lamp - Epson EMP-715 Owner's Manual

I I I I Replacing the Lamp
Replace the lamp at the following times (model number: ELPLP14).
When a message stating [Lamp Replace] is displayed for thirty seconds after
the start of projection
When the lamp indicator is blinking in orange
The lamp indicator will blink in orange.
When the brightness and picture quality has deteriorated below the initial
levels
Point
· Replace the lamp as quickly as possible after the message has been displayed to main-
tain the initial brightness levels and picture quality.
· The replacement message has been set at approximately 900 hours of use in order to
maintain the initial brightness levels and picture quality.
· Although the replacement message is displayed after approximately 900 hours of use,
there are cases where the individual characteristics of each lamp and other usage condi-
tions result in it not lighting up before this 900 hours has elapsed. For this reason, always
prepare a replacement lamp well in advance.
· Replacement lamps are available from Epson OA Supplies Inc.
Order your lamps from your nearest Epson dealer.
Lamp Replace

Replacing the Lamp - 111