Setting/Modifying Access Rights For Users/Groups; About Access Rights; Specify Share-Level Access Protocols - LaCie 2big Network 2 User Manual

LaCie 2big Network 2
User Manual
4.9.4. Setting/Modifying Access Rights for
Users/Groups
To modify access rights to the share for users or groups, follow the
instructions below (and refer to
Modify user access (to a private share):
✦
the right of the share listing, then select
In the window that opens, select a user in either the
or Read Only column and click the add button. To remove
a user, select the user in the Members column and click the
remove button.
TECHNICAL NOTE: If you select "Grant read access to Guest
and System users", the Share will be accessible in RO by any user
(including guests) in addition to registered users. This will be indi-
cated in the Shares table with a "+" next to the number of users with
access to the share.
Modify group access: Click the edit icon to the right of the
✦
share listing, then select
group in either the Read Write
hand column and click the add button. To remove a group,
select the group in the right-hand column and click the re-
move button.
To make a share private or public:
✦
right of the share listing, then select either
public or Change share to
4.9.5.

About Access Rights

Read-Only means that all users can view and open files, but
✦
they only the administrator can copy files to the share (see
table at right).
Read/Write means that all users can view, modify, and copy
✦
files to the share.
4.9.6.

Specify Share-Level Access Protocols

If you click on the bullet under the Protocols column, you can modify
which access protocols are active for that share. By default, new
shares have SMB, AFP, and FTP enabled. If you want the share to
serve files to UPnP/DLNA devices and/or to act as a Time Machine
target, activate these protocols by clicking on the bullet in the Proto-
cols column. If the default setting is overruled at the share level, the
bullet in the Services column will turn from blue to yellow
• DESIGN BY NEIL POULTON
Fig. 57).
Click the edit icon to
Manage User Access.
Read Write
Manage Group Access. Select a
or Read Only box in the left-
Click the edit icon to the
Change share to
private.
(Fig.
Administering Your LaCie 2big Network 2
Fig. 57
Fig. 58
58).
page 44