Led Behavior - LaCie 2big Network 2 User Manual

LaCie 2big Network 2
User Manual
1.4.3.

LED Behavior

The front and rear LED indicate drive status and activity. This section describes the behavior of the LED indicators.
TECHNICAL NOTE: Even if you have turned off the front LED using the Dashboard
light will always cause the front LED to turn on.
Front LED Color
Blinking blue
Solid blue
Blinking blue/red
Blinking red
Solid red
• DESIGN BY NEIL POULTON
Rear LED Color
Activity LED for working disk(s)
(until they are fully initialized)
Activity LED for working disk(s)
Activity LED for working disk(s)
Solid red in non-functional disk(s)
Activity LED for working disk(s)
Activity LED for working disk(s)
Activity LED for working disk(s)
Solid red in non-functional disk(s)
(4.12. Dashboard: Eco
2big Network 2 State
Occurs as the 2big is booting; will cease once the drives are fully initial-
ized
RAID synchronizing; will cease once operation has concluded
Drive working (read/write)
RAID is degraded; data is intact but no longer protected from further failed
disks
Power supply has been cut but power is still being supplied through the
UPS
Temperature alert (first level)
Temperature alert (critic level) – the product will shut off
Power supply has been cut and the UPS has run out of reserve power – the
product will shut off
RAID has failed and data has been lost
Introduction
page 11
Management), events triggering a red