Service Call Errors - Canon MP800 - PIXMA Color Inkjet Service Manual

2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (COPY button), or
Alarm LED Lit in Orange)
Service call errors are indicated by the number of cycles the Alarm LED and COPY button blink, and the corresponding error
code is displayed on the LCD.
Cycles of blinking
in orange (Alarm
LED) and green
(COPY button)
2 times Carriage error
3 times Line feed error [6000] An error occurred in the LF encoder signal.
4 times Purge cam
sensor error
5 times ASF (cam)
sensor error
6 times Internal
temperature
error
7 times Waste ink
absorber full
8 times Print head
temperature
rise error
9 times EEPROM error [6800] A problem occurred in writing to the
11 times Carriage lift
mechanism
error
12 times AP position
error
13 times Paper feed
position error
14 times Paper feed cam
sensor error
15 times USB Host
VBUS
overcurrent
16 times Valve sensor
error
17 times Motor driver
error
19 times Ink tank
position sensor
error
20 times Other hardware
error
Error
Error
code
[5100] An error occurred in the carriage encoder
signal.
[5C00] An error occurred in the purge unit.
[5700] This error takes place when feeding paper from
the ASF after an error occurred in the ASF cam
sensor.
[5400] The internal temperature is not proper.
[5B00] The waste ink absorber is full.
[5200] The print head temperature exceeded the
specified value.
EEPROM.
[5110] The carriage did not move up or down
properly.
[6A00] An error occurred in the AP motor during
purging operation.
[6B00] An error occurred in the paper feed motor.
[6B10] An error occurred in the paper feed cam sensor
during paper feeding from the front paper feed
cassette.
This error is also indicated when the waste ink
counter is 60% or more, and a paper jam occurs
in the under guide.
[9000] The USB Host VBUS is overloaded.
[6C00] An error occurred in the valve sensor during
cleaning.
[6D00] The AD conversion value indicating the motor
driver temperature is not proper.
[6502] None of the ink tank position is detected.
[6500] The PCI bus error is detected by the ASIC.
Conditions
1-7
Solution
(Replacement of listed parts, which
are likely to be faulty)
- Carriage unit
- Timing slit film
- Logic board ass'y
- Carriage motor
- Timing sensor unit
- Timing slit disk film
- Feed roller ass'y
- Platen unit
- Logic board ass'y
- Paper feed motor
- Purge unit
- Logic board ass'y
- Sheet feed unit
- Logic board ass'y
- Ink absorber kit
- Print head
- Logic board ass'y
- Logic board ass'y
- PR lift shaft ass'y
- Sheet feed unit
- Logic board ass'y
- Carriage lift sensor unit
- Sheet feed unit
- Logic board ass'y
- Purge unit
- Sheet feed unit
- Logic board ass'y
- Sheet feed unit
- Logic board ass'y
- Logic board ass'y
- Logic board ass'y
- Purge unit
- Logic board ass'y
- Platen unit
- Logic board ass'y
- Logic board ass'y