Destination Settings; Button And Lcd Test; Waste Ink Amount Setting; Lf Correction - Canon MP800 - PIXMA Color Inkjet Service Manual

1 time Orange (Alarm)
2 times Green (COPY)
3 times Orange (Alarm)
4 times Green (COPY)
5 times Orange (Alarm)
6 times Green (COPY)
7 times Orange (Alarm)
8 times Green (COPY)
9 times Orange (Alarm)
10 times Green (COPY)
11 times Orange (Alarm)
12 times Green (COPY)
13 times
Orange (Alarm)
14 times Green (COPY)
15 times Orange (Alarm)
16 to 21 times Green at even
numbers (COPY)
Orange at odd
numbers (Alarm)
Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green) lights steadily
without any changes.
- At the end of the service mode, press the ON/OFF button. To protect the media sensor from being dislocated during
transportation, the paper lifting plate of the sheet feeder unit will be raised.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed
in the table below, and press the ON/OFF button.
Time(s) LED indication
0 times Green (COPY)
1 time Orange (Alarm)
2 times Green (COPY)
Service test print
EEPROM information
print
EEPROM initialization
Waste ink counter
resetting

Destination settings

Print head deep cleaning

LF correction

CD / DVD check pattern
print
CD / DVD print position
correction (horizontal: X
direction)
CD / DVD print position
correction (vertical: Y
direction)

Button and LCD test

Return to the menu
selection
Return to the menu
selection
Left margin correction

Waste ink amount setting

Return to the menu
selection
Destination
No change of the destination
Japan
Korea
1-28
See 3-4. Verification Items, (1) Service test print.
Set a sheet of A4 or letter size paper.
See 3-4. Verification Items, (2) EEPROM
information print.
The following items are NOT initialized, and the
shipment arrival flag is not on:
- USB serial number
- Destination settings
- Waste ink counter
- CD / DVD correction value
- LF correction value
Once in the service mode: Press the On/Off
button 2x after pressing the Stop button 4x.
See 3-3. Adjustment / Settings, (8) Service mode,
"Destination settings procedures."
(Cleaning of both black and color)
See 3-3. Adjustment / Settings, (8) Service mode,
"LF correction procedures."
Not used in servicing
Not used in servicing.
Not used in servicing.
See 3-3. Adjustment / Settings, (8) Service mode,
"Button and LCD test procedures"
Not used in servicing.
See 3-3. Adjustment / Settings, (8) Service mode,
"Waste ink amount setting procedures"
Supported
Not supported
CD / DVD print