Administrator mode
SNMP Setting
Specify the SNMP settings.
Item
SNMP
UDP Port Setting
SNMP v1/v2c Setting
Read Community Name
Write Community Name
C451
Description
Select whether or not SNMP is used. If yes, specifies whether to use
the SNMP. If yes, specify whether to use SNMP v1/v2 (IP), SNMP
v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
Default setting: 161
Specify the UDP port number.
Specify settings for using SNMP v1/v2c.
Specify the community name to be used for scanning (up to 15
characters).
Specify the community name to be used for reading and writing (up
to 15 characters).
3
3-101