Konica Minolta bizhub C451 User Manual page 211

Administrator mode
Item
SNMP v3 Setting
Context Name
Discovery User Name
Read User Name
Security Level
auth-password
priv-password
Write User Name
Security Level
auth-password
priv-password
Encryption Algorithm
Authentication Method
TRAP Setting
Note
If "Enhanced Security Mode" is set to enable, the community name for
the SNMP v1/v2c settings will be displayed. In addition, "Authentication
OFF" cannot be selected beside "Write User Name" - "Security Level"
under "SNMP v3 Setting".
C451
Description
Specify settings for SNMP v3.
Specify the context name (up to 63 characters).
Specify the user name for detection (up to 32 characters).
Specify the name of read only user (up to 32 characters).
Specify the security level for read only user.
Specify the read only user authentication password to be used for
authentication (up to 32 characters).
Specify the read only user privacy password to be used for privacy
(encryption) (up to 32 characters).
Specify the reading/writing user name (up to 32 characters).
Specify the security level for reading/writing user.
Specify the reading/writing user authentication password to be
used for authentication (up to 32 characters).
Specify the reading/writing user privacy password to be used for
privacy (encryption) (up to 32 characters).
Specify the encryption algorithm.
Specify the authentication method.
Select whether or not to permit the TRAP settings and whether to
enable or disable the TRAP settings when authentication failed.
3
3-102