Konica Minolta bizhub C451 User Manual page 86

User mode
Item
Scan Size
Application Setting
Original Direction
2-Sided Binding Direction
Special Original
Book Scan
Erase
Compose (Date/Time)
Compose (Page)
Compose (Header/Footer)
Compose (Stamp)
Stamp Combine Method
C451
Description
Select the document size ("Auto", "Standard Size" or "Custom
Size").
If "Standard Size" is selected, select the size and the feed direc-
tion.
If "Custom Size" is selected, specify the height and width.
Click the [Display] button, and then specify settings for the func-
tions that are displayed.
Select the document orientation.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long
Original" as the setting for the loaded document.
Specify whether to perform book scan.
To specify this item, select settings for the scanning method
and center erasing. If any setting other than "Book Spread" is
selected for the scanning method, select the binding direction.
Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides
of the document ("Top", "Bottom", "Left" and "Right").
Specify whether to print the date/time.
To specify this item, specify settings for the following.
• Date Type
• Time Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
Specify whether to pint page numbers.
To specify this item, specify settings for the following.
• Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
Selects whether to print a header/footer.
To specify this item, specify the registration number of the
header/footer. To check the registered header/foot, click the
[Confirm Registed Contents] button.
Specify whether to print the stamp.
To specify this item, specify settings for the following.
• Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Con-
tents] button. A registered stamp must first be registered from
the control panel.
Select "Image" or "Text".
2
2-51