Konica Minolta bizhub C451 User Manual page 196

Administrator mode
Item
E-mail RX Setting
POP Server Address
Login Name
Password
APOP Authentication
MDN Response
Connection Timeout
Port Number
Use SSL/TLS
Port No. (SSL)
Check for New Messages
C451
Description
Select whether or not e-mail is received.
Type in the address of the reception POP server. (Format:
***.***.***.*** or FQ DN: Range for ***: 0 to 255) To type in a host
name, select the "Please check to enter host name." check box.
If the machine is set to use IPv6, an IPv6 address can also be
specified.
Before entering a host name, check that the DNS setting is cor-
rectly specified. For details, refer to "TCP/IP Setting - TCP/IP
Setting" on page 3-80.
Type in the logon name for the POP server (up to 63 characters).
Type in the password for logging on to the POP server (up to 15
characters).
Select whether or not APOP authentication is used.
Select whether MDN response is turned on or off.
Specify the amount of time until communication with the server
times out.
Type in the port number for the server. (Range: 1 to 65535)
Select whether or not SSL/TLS is used. To use SSL/TLS, select
the check box, and then type in the port number. (Range: 1 to
65535)
Specify whether or not the server is automatically checked for re-
ceived e-mail messages. This appears if the Internet fax opera-
tion can be used.
3
3-87