Konica Minolta bizhub C451 User Manual page 80

To send a fax
– Special dialing symbols such as tone, pause, -, etc. are entered if
necessary.
[Tone]: If pulse dialing is being used, touch this button to send a
push-button tone. Tone is used when a fax data services, etc are
used. "T" appears on the screen.
[Pause]: Touch this button to insert a pause when dialing. Touch
[Pause] once to insert a 1-second pause; multiple pauses can be
entered. "P" appears on the screen.
[-]: Entered as a delimiter when dialing. This has no effect on dailing.
"-" appears on the screen.
– A fax number can also be entered by using the keypad in the screen
that appears after touching [Direct Input], then [Fax].
– When the keypad is used, the fax number can be entered directly
even when [Address Book] tab or the [Job History] tab is displayed.
– When using a dial (pulse) line, it is possible to change to push tone
by just touching [*].
The destination is specified.
C451
2
2-25