Konica Minolta bizhub C451 User Manual page 112
Bizhub c451 fk-502 fax operations user guide
Hide thumbs
Also See for bizhub C451:
- User manual (808 pages) ,
- Copy operations (610 pages) ,
- Operation manual (304 pages)
Table of Contents
Advertisement
To send a fax
5
Touch [Quick Memory TX].
–
Touch [Quick Memory TX] again if you wish to abort this setting.
6
Touch [OK] and touch [Close] on the next screen.
Quick memory transmission is set, and the machine returns to the Fax/
Scan screen.
7
Specify other settings if required.
–
For details on Scan settings, refer to "Specifying scanning condi-
tions" on page 2-12 or "Scan Settings" on page 6-2.
–
For details on Original Settings, refer to "Original Settings" on
page 6-4.
–
For details on Communication Settings, refer to "Communication
Settings" on page 6-5.
8
Specify the destination.
–
For details regarding specifying destinations, refer to "Specifying
only one destination" on page 2-17.
9
Press [Start] key.
–
If the fax cannot be sent because the recipient's line is busy, the re-
cipients number is redialed. For details regarding redialling, refer to
"When unable to send fax" on page 2-42.
–
For aborting transmission, refer to "Aborting transmission" on
page 2-49.
–
If you are unable to send a fax, refer to "Fax cannot be sent" on
page 4-2.
Fax transmission starts as the first page is scanned.
C451
2
2-57
Advertisement
Table of Contents
