Konica Minolta bizhub C451 User Manual page 485

Appendix
Terms
Resolution
Memory RX
Quick memory
transmission
Group
Bulletin board
Total # of Pages
Consolidated
original
Resending
Background Re-
moval
Sharpness
Main scanning
direction
Default value
Confidential
communication
Manual trans-
mission
Transmission
reservation
Dialing method
Temporary
memory recep-
tion
C451
Explanation
This is a degree of details when scanning an original. The higher the resolu-
tion, the more detailed the image is, and the more time (transmission time)
transmitting takes. Select the appropriate resolution.
This is the function to store the received original in memory and to print if re-
quired.
This is the method to start sending of fax by scanning one page of the original
at the same time. Even in case of multiple originals, this is a function to send
the original without overflowing the memory.
Grouping of the abbreviation No. of multiple groups. It is convenient when
there are large numbers of reception of sequential broadcast and sequential
polling in the same address.
This function posts the original to be viewed, or stores the original to be
transmitted through polling.
Used for quick memory transmission to send the fax with the total number of
pages. This allows the recipient to check whether the all pages were received
or not (In case of memory transmission, the total no. of pages are automati-
cally added).
This is a function to detect and send the respective size of original by setting
the original with different sizes.
This is a function to resend the specific original stored in the memory that
couldn't be sent either to same destination or to another destination.
This is a function to send the original by adjusting the brightness of the back-
ground color of the original.
This is a function to send an original by enhancing the edge of character.
This is the horizontal direction for scanning originals.
The setting value specified in advance when the machine was shipped from
the factory. Some default settings can be changed from the Utility mode. It
is convenient when frequently used value is set as default settings depending
on the usage conditions.
A function for sending and receiving originals to be viewed only by specific
persons. The sent confidential original is saved in a confidential box on the
recipient's fax machine and is not printed when it is received. The received
original can be printed if a specific operation is performed, for example, the
access code for the confidential box is entered.
An operation to send a fax while checking the status of the receiving ma-
chine.
This is a function to reserve the next transmission while current transmission
or printing.
There are three types: PB (push-button (tone) dialing), 10PPS (pulse dialing
at 10 pps), and 20PPS (pulse dialing at 20 pps).
This is a function for automatically saving the received original in the memory
when the machine cannot print the received original, such as when the ma-
chine has run out of paper. When more paper is added, the temporarily saved
original is printed.
12
12-8