Konica Minolta bizhub C451 User Manual page 359

Utility mode
5
Select the list that is to be registered, touch [New], enter Sender name
and then touch [OK].
– Touch [↓] or [↑] to go to next page or previous page.
– Touch [Edit] when already registered sender name are to be cor-
rected.
– Touch [Delete] when already registered sender name are to be de-
leted.
– A maximum of 20 sender names can be registered.
– The registered sender name can be selected from Scan Settings
screen at the time of transmission. For details refer to "Specifying
the way of adding the transmission source information (Fax Header
Settings)" on page 6-74.
– For details on text input operations, refer to "Entering text" on
page 12-3.
Sender name is registered.
6
When two or more sender name are registered in the Sender name list,
touch [Set as Default] and set the initial value.
– The sender name that is set to the default value here is initial value
of the [Fax Header Settings] of [Communication Settings].
7
Touch [Close].
8
Touch [Sender Fax No.].
C451
10
10-53