Printer Setup; Page Count - Lexmark E350d - E B/W Laser Printer Service Manual

Printer setup

Defaults
Selections are U.S. or Non-U.S. This selection affects the following defaults:
Printer setting
Default paper size*
Envelope size*
Fax paper size
PCL Symbol Set
PPDS code page
Units of measure
* Where input sources do not have size-sensing capabilities.
Warning: Changing this setting resets the printer to factory defaults, and data may be lost. It cannot be undone.

Page Count

Reset the page count when an engine card is replaced.
To reset the page count:
1.
Select Page Count from the PRINTER SETUP menu.
Page Count
=1234567*
2.
The leftmost number blinks. Use Menu to increase or decrease the number, and press
next digit to the right. Continue until the correct number displays. To skip a number without changing it,
press .
When is pressed after the last digit, the number is saved.
Perm Page Count (permanent page count)
The permanent page count can only be viewed and cannot be changed.
To view the permanent page count:
1.
Select Perm Page Count from PRINTER SETUP.
2.
Press Return to return to PRINTER SETUP.
U.S. value Non-U.S. value
Letter A4
10 Envelope DL Envelope
Letter A4
PC-8 PC-850
437 850
Inches Millimeters
4512-420, -430
to move to the
3-19
Diagnostic aids