3. Diagnostic aids
Accessing service menus
There are two different test menus that can be accessed during POR to identify problems with the printer.
Configuration Menu
Diagnostics Mode
Printing menus
To print a listing of the states and settings of the printer:
1.
At the Ready prompt, press
2.
Press
.
3.
Press
until Print Menus appear.
4.
Press
.
1. Turn off the printer.
and Back
2. Press and hold
3. Turn on the printer.
4. Release the buttons when Performing
Self Test displays.
5. The message CONFIG MENU displays on
the top line of the operator panel.
1. Turn off the printer.
2. Press and hold Go
and Back
3. Turn on the printer.
4. Release the buttons when Performing
Self Test displays.
under Menu until Utilities appears.
The Configuration menu group contains a set
of menus, settings and operations which are
.
infrequently required by a user. Generally, the
options made available in this menu group are
used to configure a printer for operation.
"Available menus" on page
See
The Diagnostic menu group contains the
settings and operations used while
.
manufacturing and servicing the printer.
"Available tests" on page
See
4512-420, -430
3-2.
3-5.
3-1
Diagnostic aids