Print Tests - Lexmark E350d - E B/W Laser Printer Service Manual

4512-420, -430
Quick Test
The Quick Test contains the following information:
•
•
•
•
To print the Quick Test page:
Note: Print the Quick Test Page on letter or A4 paper.
1.
Select REGISTRATION from the Diagnostics menu.
2.
Press Go.
Once the Quick Test Page completes printing, the Registration screen displays again.

Print tests

Input source tests
Input source print tests can verify that the printer can print on media from the installed input sources. Only
installed sources appear in the menu.
To run the input source test:
1.
Select PRINT TESTS from Diagnostics Mode.
2.
Select the input source from the sources displayed on the menu. All installed sources are listed.
Menu selections
Tray 1
Tray 2*
* If installed
3.
Select either Single (feeds one sheet of blank media from the selected source) or Continuous (continues
feeding blank media from the selected source until Return or Stop is pressed) by using
Press Return or Stop to exit the test.
Print quality pages (Prt Quality Pgs)
To print the Print Quality pages:
1.
Select PRINT TESTS from Diagnostics Mode.
2.
Select Prt Quality Pgs.
3.
Press .
Four pages print. Additional button presses are ignored until the pages have printed.
The first page is a mix of graphics and text. The second two pages are graphics, and the last page is blank.
The Print Quality pages can also be printed from the Configuration Menu.
3-14
Lexmark™ E350d, E352dn
Print registration settings
Alignment diamonds at the top and bottom
Horizontal lines to check for skew
General printer information, including current page count, installed memory, serial number,
and code level.
Description
Standard tray
Optional tray
.