Transparency Print Quality Is Poor; Toner Fog Or Background Shading Appears On Prints - Lexmark CS410 Series User Manual

Troubleshooting

Transparency print quality is poor

Action
Step 1
From the printer control panel, set the paper type in the Paper menu to
match the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Step 2
a
Check if you are using a recommended type of transparency.
b
Resend the print job.
Is the print quality still poor?

Toner fog or background shading appears on prints

ABCDE
ABCDE
ABCDE
Action
Step 1
a
Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to
direct light for more than 10 minutes. Extended exposure to light
may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of the
imaging kit. This could damage the imaging kit.
b
Resend the print job.
Does fog or shading disappear from the prints?
Step 2
Replace the imaging kit, and then resend the print job.
Does fog or shading disappear from the prints?
Yes No
Go to step 2. Set the paper type to
Transparency.
Contact customer The problem is solved.
support.
Yes No
The problem is solved. Go to step 2.
The problem is solved. Contact
support.
193
customer