Saving Energy; Using Eco-Mode; Reducing Printer Noise - Lexmark CS410 Series User Manual

Saving money and the environment

Saving energy

Using Eco‑Mode
Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.
1
From the printer control panel, navigate to:
> Settings >
Use To
Off Use the factory default settings for all settings associated with Eco‑Mode. This setting supports the
performance specifications for your printer.
Energy Reduce energy use, especially when the printer is idle.
Notes:
•
Printer engine motors do not start until a job is ready to print. You may notice a short delay
before the first page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper
•
Enable automatic two‑sided (duplex) printing.
•
Turn off print log features.
2
Press .

Reducing printer noise

Use Quiet mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings >
Use
On
Off
> Settings > > General Settings >
> Settings > General Settings >
> Eco‑Mode >
> Quiet Mode > > select a setting you want
To
Reduce printer noise.
Notes:
• Print jobs process at a reduced speed.
•
Printer engine motors do not start until a document
is ready to print. There is a short delay before the
first page is printed.
•
The alarm control and cartridge alarm sounds are
turned off.
•
The printer will ignore the Advance Start command.
Use factory default settings.
Note: This setting supports the performance
specifications of the printer.
> select the setting you want
107