Hardware And Internal Option Problems; Printer Display Is Blank - Lexmark CS410 Series User Manual

Troubleshooting
Action
Step 10
Check if you have selected the correct port settings in the printer driver.
Are the port settings correct?
Step 11
Check the installed printer driver.
Is the correct printer driver installed?
Step 12
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Is the printer working?

Printer display is blank

Action
Step 1
Press the Sleep button on the printer control panel.
Does Ready appear on the printer display?
Step 2
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Do Please wait and Ready appear on the printer display?

Hardware and internal option problems

Cannot detect memory card
Action
Make sure the memory card is installed.
a
Install the memory card. For more information, see "Installing a
memory card" on page 21.
Note: Check if the memory card is securely connected to the printer
controller board.
b
Print a menu settings page, and then check if the card is listed in the
Installed Options list.
Is the card listed in the Installed Options list?
Yes No
Go to step 11. Use correct printer
driver settings.
Go to step 12. Install the correct
printer driver.
The problem is solved. Contact
support.
Yes No
The problem is solved. Go to step 2.
The problem is solved. Turn off the printer,
and then contact
customer
Yes No
The problem is solved. Contact
support.
168
customer
support.
customer