Finishing Menu - Lexmark CS410 Series User Manual

Understanding the printer menus

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Source
Tray [x]
Manual Feeder
To
Specify whether two‑sided (duplex) printing is set as the default setting for all print
jobs.
Notes:
•
"1 sided" is the factory default setting.
•
You can set two‑sided printing from the software program.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and pop‑up
menus.
Define binding for duplexed pages in relation to paper orientation.
Notes:
•
Long Edge is the factory default setting. This assumes binding along the long
edge of the page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,1,1) (2,2,2)" is the factory default setting.
Specify whether blank separator sheets are inserted.
Notes:
•
Off is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job when
Collate is set to On. When Collate is set to Off, then a blank page is inserted
between each set of printed pages, such as after all page 1's and after all page
2's.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing transparencies or when inserting blank pages in
a document.
Specify the paper source for separator sheets.
Note: Tray 1 (standard tray) is the factory default setting.
94