Connecting More Than Two Pcs To The Monitor; To Switch The Input Signal - Eizo RADIFORCE RX220 User Manual

6-. Connecting More than Two PCs to the Monitor

More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort connector on
the back of the monitor.
Connection examples
●

To switch the input signal

The input signal switches each time
When the signal is switched, the active input port name appears at the top right corner of the screen.
Chapter 6 Reference
0
DisplayPort
DVI-I connector
connector
Digital
Signal cable
(PP200 option)
DisplayPort DVI
connector connector
To PC 1
is pressed.
DVI-I connector
Digital
Signal cable
(supplied FD-C39)
D-Sub mini 15-
pin connector
To PC 2 To PC 3
Analog
Signal cable
(supplied FD-C16)