Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Eizo RADIFORCE RX220
Summary of Contents for Eizo RADIFORCE RX220
- Page 1 Important Please read PRECAUTIONS, this User’s Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Manual (separate volume) • The latest User’s Manual is available for download from our site: http://www.radiforce.com...
- Page 2 Copyright© 2009 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
-
Page 3: Notice For This Monitor
Notice for this monitor This product is suited to display medical images of such modalities as MRI and CT. It does not support the display of mammography images for diagnosis. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. -
Page 4: Lcd Panel
Cleaning Attention Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, • which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. ● LCD Panel Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. -
Page 5: Table Of Contents
[Mode Preset] ..........1 CONTENTS ............. -. Locking Switches [Key Lock] .......1 Chapter 1 Introduction ........6 -. Setting the EIZO Logo Display [Logo] .. 1-1. Features ............6 -. Setting Orientation ........ ● 1-. Switches and Indicators ......... 7 Using Image Rotation Function [Image Rotation] .......... -
Page 6: Chapter 1 Introduction
Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features Resolution: 2M pixels (Portrait : 1200 × 1600 dots (H × V)) • Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals) •... -
Page 7: Switches And Indicators
Power saving Main Power Switch / Power Switch off 1-. Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. -
Page 8: Basic Operation And Functions
1- . Basic Operation and Functions Basic operation of Adjustment menu Displaying Adjustment Menu Press The adjustment menu appears. Menu title Current mode Item Settings Menu Adjusting/Setting Choose a menu to adjust/set with , and press Choose an item to adjust/set with , and press Adjust/set the selected item with , and press... -
Page 9: Functions
Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Item Adjusting/Setting “2-3. Color Adjustment” (page Color Brightness Contrast Temperature Gamma Advanced Settings Saturation Outline Enhancer Gain 6 Colors “3-7. Restoring the Default Setting” Color Reset (page “2-4. -
Page 10: Chapter Adjusting Screen
Chapter Adjusting Screen -1. Setting Screen Resolution Compatible Resolutions/Frequencies For details on compatible resolutions, refer to “Compatible Resolutions/Frequencies” in the Setup Manual. Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. -
Page 11: Displaying Screen Correctly
-. Displaying Screen Correctly Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. When performing advanced adjustment, see “2-3 Color Adjustment” (page 15) and subsequent pages. Analog Input Attention Wait 30 minutes or more from monitor power on before starting adjustments. •... - Page 12 Prepare the display pattern for the analog display adjustment. Download the “Screen adjustment pattern files” from our site: http://www.radiforce.com NOTE For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file. • Perform the auto adjustment again with the analog screen adjustment pattern displayed.
- Page 13 Perform advanced adjustments for the following using the <Screen> menu of the <Analog Adjustment>. Adjust the clock, phase and position, in this order. ● To eliminate vertical bars [Clock] Procedure Choose <Clock> from the <Analog Adjustment> menu, and press Adjust the clock with slowly so as not to miss the adjustment point.
- Page 14 Adjust the color gradation. ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure Display Pattern 2 in full screen on the monitor using the screen adjustment pattern files. Choose <Range Adjustment>...
-
Page 15: Color Adjustment
-. Color Adjustment ● To select the display mode (CAL Switch) CAL Switch allows you to select easily the adequate mode suitable for the monitor’s application. CAL Switch mode Mode Purpose 1-DICOM Available to display in DICOM mode. 2-Custom Available for the color settings according to your preference. 3-CAL Displays the screen adjusted by calibration software. -
Page 16: Adjustment Items In Each Mode
● Adjustment items in each mode According to the mode selected, the adjustable function differs. (You can not select any function unavailable for adjustment or setting.) The adjustments or settings made for each mode are applied to all input signals. For the adjustment method of each function, refer to subsequent pages. -
Page 17: To Adjust The Brightness [Brightness]
● To adjust the brightness [Brightness] The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD back panel). Adjustable range: 0 to 100% Procedure Choose <Color> from the Adjustment menu, and press Choose <Brightness> from the <Color> menu, and press Adjust the brightness with Press to exit the adjustment. -
Page 18: To Adjust The Gamma Value [Gamma]
● To adjust the gamma value [Gamma] The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the luminance of the monitor is called as “Gamma correction”. -
Page 19: To Enhance The Outline Of The Image [Outline Enhancer]
● To enhance the outline of the image [Outline Enhancer] OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between pixels composing the images. This may improve the texture of the material and its feel of the images. -
Page 20: Displaying Lower Resolutions
-. Displaying Lower Resolutions ● To change screen size [Screen Size] You can change the screen size by using <Screen Size> from <Screen> menu. Menu Function Full Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. Enlarged Displays an image in full screen. -
Page 21: Chapter Setting Monitor
Chapter Setting Monitor -1. Enabling/Disabling Mode Selection [Mode Preset] Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure Choose <Tools> from the Adjustment menu, and press Choose <Mode Preset>... -
Page 22: Setting The Eizo Logo Display [Logo]
-. Setting the EIZO Logo Display [Logo] This function allows you to display, or not, the EIZO logo. Procedure Press to turn off the monitor. down at least 2 seconds to turn on the monitor. Press holding The Optional Settings menu appears. -
Page 23: Setting Language [Language]
-. Setting Language [Language] This function allows you to select a language for the adjustment menu or displaying message. Selectable languages English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese Procedure Choose <Menu Settings> menu from the Adjustment menu, and press Choose <Language> from the <Menu Settings> menu, and press Choose a language with Press to exit the adjustment. -
Page 24: Restoring The Default Setting
-7. Restoring the Default Setting There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. Attention • After resetting, you cannot undo the operation. NOTE For main default settings, refer to “Main default settings (factory settings)”... -
Page 25: Chapter Power Saving Function
Chapter Power Saving Function -1. Setting the Power Saving [Power Save] This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor enters the power saving mode, no image is displayed on the screen. Attention Turning off the main power switch or unplugging the power cord completely shuts off power supply to the •... -
Page 26: Chapter Troubleshooting
Chapter Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. No-picture problems → See No.1 - No.2. • Imaging problems (digital input) → See No.3 - No.8. • Imaging problems (analog input) → See No.3 - No.12. •... - Page 27 Problems Possible cause and remedy Afterimages are particular to LCD monitors. Avoid . Afterimages appear • displaying the same image for a long time. • Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
- Page 28 Problems Possible cause and remedy 16. The monitor connected with the USB cable is not • Check whether the USB cable is connected correctly. (page detected. / USB devices connected to the monitor • Change the USB port to another one. If the PC or does not work.
-
Page 29: Chapter 6 Reference
6-1. Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Attention When attaching an arm or stand, follow the instructions of their user’s manual. -
Page 30: Connecting More Than Two Pcs To The Monitor
6-. Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort connector on the back of the monitor. Connection examples DisplayPort DVI-I connector DVI-I connector connector Digital Analog Digital... -
Page 31: To Set Input Signal Selection [Input Selection]
● To set input signal selection [Input Selection] The monitor recognizes the connector through which PC signals are input. Priority setting Function Auto When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Manual The monitor detects only the PC’s signals currently displaying automatically. -
Page 32: Making Use Of Usb (Universal Serial Bus)
A PC equipped with a USB port or another USB hub connected to a USB compatible PC Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later EIZO USB cable (MD-C93) Attention This monitor may not work depending on PC, OS or peripheral devices to be used. For USB compatibility of •... -
Page 33: Displaying Monitor Information
6-. Displaying Monitor Information ● Displaying signal information [Signal Info] This function displays the information about the current input signals displayed. Choose <Tools> from the Adjustment menu, and press Choose <Signal Info> from the <Tools> menu, and press The Signal Info screen appears. (Example) ●... -
Page 34: Specifications
6-. Specifications LCD Panel 21.3-inch (540 mm) TFT color LCD Size Anti-Glare Surface treatment Surface hardness Viewing angle : Horizontal 170°, Vertical 170° (CR:10 or more) Viewing angle 0.270 mm Dot Pitch Approx. 17 ms Response Time Horizontal Scan 31-100 kHz Analog Frequency 31-100 kHz... - Page 35 Operating temperature: 0 °C - 35 °C (32 °F - 95 °F) Environmental Temperature Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F) Conditions Humidity Operating humidity: 20% - 80% R.H. (no condensation) Storage humidity: 10% - 80% R.H. (no condensation) Operating: 700 to 1,060 hPa Pressure Storage: 200 to 1,060 hPa...
-
Page 36: Outside Dimensions
Outside Dimensions Unit: mm (inch) SWIVEL 240 (9.04) 325 (12.08) 376 (14.08) 95 (3.74) 25 (0.98) 326 (12.08) 25 (0.98) 62.5 (2.46) 138 (5.04) 100 (3.09) 138 (5.04) 325 (12.08) 208.5 (8.02) 323 (12.07) Connector Pin Assignment DVI-I connector • 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18... -
Page 37: Accessories List
EIZO “Clip-On Swing Sensor G2” EIZO “RadiNET Pro” Ver.3.4.0 or later Network QC Management Software Cleaning Kit EIZO “ScreenCleaner” PP200 Signal Cable Refer to Web site of EIZO NANAO CORPORATION for the latest information about supported graphics card (http://www.radiforce.com). Chapter 6 Reference... -
Page 38: Glossary
6-6. Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. -
Page 39: Range Adjustment
HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable to HDCP system. -
Page 40: Preset Timing
6-7. Preset Timing The following table shows factory preset video timing (for analog signal only). Attention Display position may be deviated depending on the PC connected, which may require screen adjustment using • Adjustment menu. If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, •... -
Page 41: Fcc Declaration Of Conformity
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord... -
Page 42: Emc Information
EMC Information Essential performance of RadiForce series is to display images and operate functions normally. CAUTION The RadiForce series requires special precautions regarding EMC and need to be installed, put into service and used according to the following information. Do not use any cables other than the cables that provided or specified by us. Using other cables may cause the increase of emission or decrease of immunity. - Page 43 Guidance and manufacturer’s declaration - electromagnetic immunity The RadiForce series is intended for use in the electromagnetic environment specified below. The customer or the user of the RadiForce series should assure that it is used in such an environment. Immunity test IEC/EN60601 test Compliance level Electromagnetic environment - guidance...
- Page 44 Recommended separation distances between portable and mobile RF communications equipment and the RadiForce Series The RadiForce series is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the RadiForce series can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the RadiForce series as recommended below, according to the maximum output power of the communications equipment.
- Page 45 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」 ，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI） ） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○...