Table of Contents
Advertisement
-. Color Adjustment
●
To select the display mode (CAL Switch)
CAL Switch allows you to select easily the adequate mode suitable for the monitor's application.
CAL Switch mode
Mode
1-DICOM
2-Custom
3-CAL
4-Text
Procedure
1.
Press
Mode menu appears at the lower left of the screen.
2.
The mode among the list is highlighted in turn each time
You can switch the current mode with
NOTE
•
The Adjustment menu and the Mode menu cannot be displayed at the same time.
You can disable a specific mode to be selected. For more information, refer to "3-1 Enabling/Disabling Mode
•
Selection"
(page
●
To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to set and save the independent color adjustment
for each mode.
Attention
Wait 30 minutes or more from monitor power on before starting the color adjustment.
•
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
Perform the range adjustment first when adjusting color for analog input signals.
•
(Refer to "To adjust color gradation automatically" on
The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics.
•
Make fine color adjustment visually when matching colors on multiple monitors.
NOTE
The values shown in "%" or "K" are available only as reference.
•
Available to display in DICOM mode.
Available for the color settings according to your preference.
Displays the screen adjusted by calibration software.
Suitable for displaying texts for word processing or spreadsheets.
The mode menu
appears.
.
→1-DICOM←→2-Custom←→3-CAL←→4-Text←
21).
Purpose
is pressed.
while the mode menu is being displayed.
or
page
14).
Chapter 2 Adjusting Screen
1
Hide quick links:
Advertisement
Table of Contents
