Table of Contents
Advertisement
4
Perform advanced adjustments for the following using the <Screen> menu of
the <Analog Adjustment>.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars [Clock]
Procedure
1.
Choose <Clock> from the <Analog Adjustment> menu, and press
Adjust the clock with
2.
slowly so as not to miss the adjustment point.
Press
3.
Press
to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering
or blurring.
●
Remove flickering or blurring [Phase]
Procedure
1.
Choose <Phase> from the <Analog Adjustment> menu, and press
Adjust the phase with
2.
3.
Press
to exit the adjustment.
Attention
•
Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct screen position [Hor.Position] [Ver.Position]
NOTE
Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to
•
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press
1.
Adjust the position with
2.
3.
Press
to exit the adjustment.
or
.
or
.
or
.
.
.
Chapter 2 Adjusting Screen
.
1
Hide quick links:
Advertisement
Table of Contents
