Table of Contents
Advertisement
7.14.3 Activating/Stopping the slide show
<Notes>Images over 8 MB, cannot be played. Whilst playing, the [Rotate] function can be activated to rotate the
images.
Remote control:
1. Press [Slide Show] to start playing.
2. Press [Slide Show] again to stop playing.
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find [Slide Show]
4. Press [Enter] to play.
5. To stop playing, repeat steps 1 to 4.
7.15 I would like to compare images (Compare live images with captured images) (PBP,
Picture by Picture)
This function will compare and contrast a live image with a captured image.
C1
C2
C3
C4
C5
Remote control:
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection screen.
2. Press [] or [] or [] or [] to select the files to be compared.
3. Press [Enter] to activate the image comparison.
4. Press [] or [] to move the images (captured images only) leftward/rightward.
5. Press [PBP] to exit.
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [] or [] to access the [Display] menu.
3. Press [] to find [PBP]
4. Press [Enter] to enter the PBP (Picture by Picture) photo selection screen.
5. Press [] or [] or [] or [] to select the files to be compared.
6. Press [Enter] to activate the image comparison.
7. Press [] or [] to move the images (captured images only) leftward/rightward.
8. Press [Menu] again to return to image thumbnails.
9. Press [Source] to exit.
7.16 I would like to activate the factory default settings (Factory Reset)
1. Press[Menu]on the remote control or control panel to enter the setting menu
2. Press [] or [] to access the [Advance] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [Enter] to activate.
C6
C7
Captured
Image
Live Image
English - 23
Advertisement
Table of Contents
