Table of Contents
Advertisement
4.3.2 Step 2: Connecting the components
Connecting to a projector
Connect the VGA OUT on the 445 to the VGA IN on the projector using the VGA cable.
Connecting to a monitor
Use VGA cable to connect VGA PASSTHROUGH connector on 445 to the VGA IN connector on a monitor.
[Note] The VGA PASSTHROUGH connector only outputs VGA IN signals.
1. Using EXTENDER adapter and C-Video cable to connect EXTENDER of 445 to a C-Video of TV.
2. Adjust DIP Switch Setting
NTSC: America, Taiwan, Panama, Philippine, Canada, Chile, Japan, Korea and Mexico
PAL: Country/region not listed above:
<Note> OSD is not available in C-Video. Functions such as [Menu] / [Rotate] / [PAN] / [Source] / [Record] / [Capture] /
[Delete] / [PBP] / [Slide Show] are not available on control panel and the remote control.
<Note> VGA output is not supported once C-Video output is enabled.
3. DIP Switch setting will not be functional until restarting the 445
Connecting to a LCD TV/ PDP
Using the HDMI cable to connect a LCD TV/ PDP
Connecting to a computer
Connecting to a TV
English - 11
Advertisement
Table of Contents
