Start Using The 445 - Dukane Camera 445 User Manual

 Use VGA cable to connect VGA IN connector on 445 to the VGA OUT connector on the computer
 Using the USB Cable
Connect to USB port then install the supplied queue program.
 Using the EXTENDER adapter and RS232 Cable to connect EXTENDER of 445 to a RS232 of computer
 Connecting to speaker
<Remark>: Or connect to an additional amplifier before connecting to the speaker.

4.4 Start using the 445

Control Panel
 When using the remote control, aim at the receptor on the DC265, and press the power button.
 Once DC265 is turned on, the LED on the control panel will flash a few times and stay lit. Please contact your
distributor if the LED is not on.
<Note> Once the password page is shown, please key in the password.
If you forget it, please contact your distributor or the service center.
Speaker
Remote Control
English - 12