Upright Sleeve Assembly; Upright Post Assembly; Step 6 - Wire Assembly - Smooth Fitness CE-8.0LC Owner's Manual

"A
I
SSEMBLY NSTRUCTIONS"
S –
TEP 4

Upright Sleeve Assembly

CAUTION: Be careful not to damage the Middle Connection Wire (109) while assembling Step 4 to 6.
Slide the Upright Sleeve (22) onto the Upright Post (4).

Refer to the drawing above. Make sure the direction of the Upright Sleeve (22) is in the correct position.
S –
TEP 5

Upright Post Assembly

a. Check that 2 x Nylon lock Nuts (M10x8t) (103) have preassembled into the front of the Main Frame (1) as FIG1
illustration shows on the top right corner, making sure that the slotted bracket of the upright post slides between the
nuts and the frame.
b. Insert the Upright Post (4) onto the Main Frame (1) and slightly secure with the 2 x Hex Head
Bolts (M10xp1.5x50mm) (95) by using the T-Handle SOCKET WRENCH(17mm) as shown.
NOTE: Please do not fully tighten Bolts (95) or lock nuts (103) until Step. 7 Has been
COMPLETED
S –
TEP 6 Wire Assembly
Plug the Middle Connection Wire (109) into the Lower Connection Wire (110).
NOTE: Please do not fully
tighten Bolts (95) until Step. 8
for the easy assembly
NOTE: Do not remove the lock
nuts during assembly (103)
6