Step 2 - Handlebar Assembly - Smooth Fitness V2300 Owner's Manual

"A I
SSEMBLY NSTRUCTIONS"
S –
TEP 1 Front Stabilizer Assembly
a. Identify the correct direction of the Front Stabilizer (7), there is an "R" decal on the right side of the Front Stabilizer
(7)(NOTE: Right and left orientation is from the seated position).
b. Attach the Front Stabilizer (7) to the Main Frame (1).
"Helpful Hint: Only hand tighten the bolts and fasteners in each step. Wait until the step is completed
before fully tightening the bolts and fasteners"
c. Attach two Lock Washers (M8)(121) and two Bolts, Socket Head (M8xp1.25x70mm)(162) that secure the Front
Stabilizer (7) to the Main Frame (1).
S –
TEP 2 Handlebar Assembly
a. Attach the Left Handlebar Assembly (85) to the Mounting Bracket (83) on the right side of the Console and secure
with one Washer (8x23x2.0t)(124), one Lock Washer (M8)(121) and one Adjustment Knob (186).
b. Repeat the above process for the left side.
**Make sure the above parts are tightened before moving on to the next page**
7
USE HARDWARE KIT
A