Section 2 - Definitions; Warning Label Definitions - Miller Electric SYNCROWAVE 250 Technical Manual

2-1. Warning Label Definitions

1 1.1
2
2.1
3 3.1
4 4.1
5
+
Syncrowave 250
SECTION 2 – DEFINITIONS
1.2
2.2 2.3
3.2
+ +
Warning! Watch Out! There are
possible hazards as shown by the
symbols.
1
1.1 Wear dry insulating gloves.
1.2 Protect yourself from electric
1.3 Disconnect input plug or
2
2.1 Keep your head out of the
1.3
2.2 Use forced ventilation or local
2.3 Use ventilating fan to remove
3
3.1 Keep flammables away from
3.2 Welding sparks can cause
3.3 Do not weld on drums or any
3.3
4
4.1 Wear hat and safety glasses.
5
+
6
6
S-176 254-A
Electric shock from welding
electrode or wiring can kill.
Do not touch electrode with
bare hand. Do not wear wet or
damaged gloves.
shock by insulating yourself
from work and ground.
power before working on
machine.
Breathing welding fumes can
be hazardous to your health.
fumes.
exhaust to remove the fumes.
fumes.
Welding sparks can cause
explosion or fire.
welding. Don't weld near
flammables.
fires. Have a fire extinguisher
nearby and have a watch
person ready to use it.
closed containers.
Arc rays can burn eyes and
injure skin.
Use ear protection and button
shirt collar. Use welding
helmet with correct shade of
filter. Wear complete body
protection.
Become trained and read the
instructions before working on
the machine or welding.
Do not remove or paint over
(cover) the label.
TM-353 Page 3