Holding Registers, “D” Group Monitor Functions - Hitachi L200 Series Instruction Manual

Note 1: Assume that the inverter current rating is 1000 (for D002).
The following table lists holding registers for the "D" Group Monitor Functions.
Holding Registers, "D" Group Monitor Functions
Func.
Name
Code
D081 Trip monitor 1
D082 Trip monitor 2
D083 Trip monitor 3
— Write all memory
Note 1: Stores new data made by transmission (for Write all memory). For more
information, refer to the Store New Register Data (ENTER command).
R/W Description
R Trip monitor 1: factor code
R Frequency
R Current
R Voltage
R Run time (high)
R Run time (low)
R ON time (high)
R ON time (low)
R Trip monitor 1: factor code
R Frequency
R Current
R Voltage
R Run time (high)
R Run time (low)
R ON time (high)
R ON time (low)
R Trip monitor 1: factor code
R Frequency
R Current
R Voltage
R Run time (high)
R Run time (low)
R ON time (high)
R ON time (low)
W Infinite *1
B–23
L200 Inverter
Network Data
Reg. Res.
0100h —
0101h 0.1 Hz
0102h 0.1 %
0103h 0.1 V
0104h 1. h
0105h
0106h 1. h
0107h
0108h —
0109h 0.1 Hz
010Ah 0.1 %
010Bh 0.1 V
010Ch 1. h
010Dh
010Eh 1. h
010Fh
0110h —
0111h 0.1 Hz
0112h 0.1 %
0113h 0.1 V
0114h 1. h
0115h
0116h 1. h
0117h
0900h —