Power Save Mode - Hitachi 55PD9700C User Manual

FUNCTION (continued)

Power Save Mode

When AV input is selected
You are provided with the function to save power consumption when no signal is detected in AV input. Set to On in
"Video Power Save" from Function Menu, which leads to the power save mode in AV4 /HDMI1 /HDMI2 and the
Standby mode in other AV input. (Please see the table below for details) Refer to
AV4,HDMI1, 2
AV1, 2, 3, 5
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync signal
PC signal
Operation mode
Indicating lamp
Returning to operating status
Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button of
the remote control.
68
When no signal is detected
Condition Indicating Lamp
Power Save
Standby
Horizontal
Vertical
Active (normal display)
Lights green
When signal is input during
On in "Video Power Save"
Orange
Red Remains as Standby mode.
Yes No
Yes Yes
On
about "Video Power Save" .
30
Turns On automatically.
Yes
No
Blank (no display)
Off
Lights orange
No
No