Hitachi 55PD9700C User Manual page 50

DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Confi guring the Setting (continued)
Upgrading DTT
The DTT can be upgraded via the confi guration menu.
MENU
1. Press button on the remote control.
2. Select "Confi guration" from the DTT main menu.
3. Select "Receiver Upgrade".
4. Press button to select "Automatic Download" along
with "Enabled".
Automatic upgrade method takes place in standby/power save
mode.
The indicator lamp will blink whilst this is taking place.The TV will
check if new software is available every time you go to standby/
power save or every night at 3:00 a.m. if select "Enabled".
You can check the current software version on the confi guration
41
menu. (See as an example.)
NOTE
• Manual upgrade starts if the "Search for New Version" button is pressed instead of "Automatic
Download" button. To use this method, follow each dialogue box in sequence.
• We do not recommend that the set is left in standby/power save mode if you intend to leave the home for a long time.
• While downloading software, you cannot operate TV. No picture is displayed, either.
Setting Favourite Mode
By activating Favourite Mode from the confi guration menu, only selected favourite channels will appear when using
button on the remote control to switch channels.
43
Refer to how to set the channel as Favourites.
MENU
1. Press button on the remote control.
2. Select "Confi guration" from the DTT main menu.
3. Select "Favourite Mode".
4. Use button to select "On" to be activated.
Automatic Download Enabled
Search for New Version
MENU EXIT i+ More
49