Power Save Mode; Sound Mode - Hitachi CMP307XU User Manual

Power Save Mode

When the RGB input jack is selected
This unit meets the power-saving requirements of VESA and International Energy Program.
When this unit is connected to a VESA DPMS computer, the Power Save (Standby/Suspend/Off) mode
can be set to be activated automatically when the computer is not being used to reduce power
consumption by this unit.
Horizontal
RGB sync
signal
Video signal
Operation mode
Display lamp
Power consumption
1) Press the MENU or SELECT button to enter sound mode.
When the Video Input jack is selected
When there is no video signal input, the power-saving system operates to reduce the power consumed
by the sunit.
Video signal
Operation mode
Screen display
Display lamp
Power consumption
1) Press the MENU or SELECT button to enter sound mode.

Sound Mode

If you press the MENU mode while the monitor has power save mode
output is enabled by cancelling the off setting of power save mode.
The Easy Menu shown to the right appears on the screen when the sound mode is selected.
After approximately 5 sec., the brightness of the
Easy Menu lowers and display continues until the
sound mode is canceled.
In sound mode, sound volume can be adjusted.
Press the MENU button to cancel sound mode.
The power save mode
mode is canceled.
When an input signal is present, the sound mode is
canceled automatically, the On mode is activated
and the input signal is displayed.
Yes
Vertical Yes
Active
(normal display)
On
Lights green
390W
Yes
On
Normal display
Lights green
390W
is activated when this
25
No Yes
Yes No
Blank (no video)
Off
1)
Blinks green
7W or less
25
No
Off
1)
Blank (no video)
Blinks green
7W or less
25
25
Remote
SOUND MODE
controller
MENU
Remote
POWER SAVE
controller
MENU
No
No
turned off, sound
25