Hitachi 55PD9700C User Manual page 27

TV SETUP OPERATION (continued)
Setup Menu (TV mode) (continued)
Selected Items
Manual Tuning
Fine Tuning
Sort
Teletext Language
Auto Off
Scart Output
26
Auto
PAL
Colour
System SECAM
NTSC4.43
NTSC3.58
Off
Skip
On
Off
NR
On
-56~+56
Off
On
DTT
TV
Monitor
Select colour system from 5 different modes.
It allows you to skip unregistered channels automatically when you
use channel up (+) down (-) buttons to select channels.
This function will automatically skip unavailable channels when set
to on.
The noise on the screen or interference could be reduced,
especially at the area of weak electric fi eld.
► : Increase the frequency data for the main tuner.
◄ : Decrease the frequency data for the main tuner.
You can change the order of channels as follows.
1. Move the cursor to the Channel row you want to change order
and then, press button.
OK
2. The colour of the letters on the designated line will be turned
into yellow bracket and with [ ].
3. Move the designated row by using
4. Press button to fi x the position.
OK
The most appropriate Teletext Language is automatically selected
depending on the country which you select in Auto Tuning. In case
that the text is not displayed correctly, for example, because of
living near a border, select another area as below.
West Europe : West European countries and Turkey.
(This is normal setting for use in Europe.)
East Europe : East European countries
Russian : Countries neighboring Russia and East European countries
Farsi : Middle Eastern countries
When no airwave has been received and no operation has
been made for 10 minutes in TV mode, it turns to standby mode
automatically.
AV1 (Scart) will be fi xed as the selected mode.
When selecting "Monitor", it is possible to monitor only the
composite video signal from AV2, AV3, AV4, or AV5 input that is
displayed on the screen at the same time.
If "Descrambler" is set to ON when selecting other than DTT, it will
be fi xed as "TV" automatically.
Setup hint
buttons.