Hitachi 55PD9700C User Manual page 20

CONNECTION (continued)
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
UK only
Except UK
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated(AC100-240V, 50/60Hz). It may cause fi re or electric shock.
For the plasma television, a three-core power cord with a ground terminal is used for effi ciency protection. Always be
sure to connect the Power Cord to a three-pronged grounded outlet and make sure that the cord is properly grounded.
If you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certifi ed power cord that meets your region's safety standard.
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the band.
When you secure the cables, please be careful not to tighten too much.
INPUT
(AV1)
INPUT
(AV2)
INPUT
(AV3)
Y/VIDEO P P AUDIO
B R
INPUT
(AV4)
L
C R
MONO
SUB WOOFER VIDEO AUDIO
OUTPUT
L R
A C
With long band
INPUT(RGB)
AUDIO
ANT
PC
ANALOG RGB
INPUT(HDMI)
AUDIO
WOW, SRS and symbol are
trademarks of SRS Labs, Inc.
HDMI2
Licensed by BBE Sound, Inc. under
one or more of the following US
patents : 5510752, 5736897.
BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
HDMI1
SERVICE USE ONLY
COMMON
INTERFACE
POWER SWIVEL
C.2 C.1
How to fasten the band:
To tighten
To loosen
Knob
Pull the band in the
direction of the arrow.
Loosen the band by
pushing the knob in the
direction of the arrow.
19