Hitachi 55PD9700C User Manual page 17

CONNECTION (continued)
Connecting Procedure (continued)
AV4 can be connected to the equipment with either Component or Composite output. Depending on whether the
Y/VIDEO input of your selected equipment is Y signal or Video signal, it automatically regards as Component or
Composite. When using as Composite, do not insert the jacks into P
Y/VIDEO
P P
B R
If your external device has a Component terminal, COMPONENT connection is recommended for
higher quality picture.
Monitor Out can be used to display same image as main unit on another monitor.
When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from
composite(AV1~5), or RF signal can be displayed to the external monitor.
OUT
VIDEO
AUDIO
L
Sub Woofer terminal can bring the deep bass sound from the external speaker.
SUB WOOFER
16
IN
AUDIO
INPUT
(AV4)
L
C R
MONO
OUTPUT
R
OUT
or P .
B R
OUT
IN
IN
or
[Example]
VCR
DVD player
Set-Top Box
[Example]
VCR
(Recording Device)
[Example]