Hitachi 55PD9700C User Manual page 16

CONNECTION (continued)
Connecting Procedure (continued)
3. Connecting to External Equipment
Terminals on Rear
AV1 can be connected to the equipment with Composite/S-Video/Audio input, and Composite/Audio output.
The output signal can support not only Analogue but also Digital Terrestrial TV signals.
INPUT Composite/S-Video/Audio
IN
If STB is connected to AV1 in France, it descrambles some of the Pay TV images by resending the signal again (In/Out).
OUTPUT Composite/Audio
OUT
When you are watching either TV or DTT broadcasting from AV1, you can switch to the other by setting
"Scart Output" in Setup menu. For example, whilst you are watching TV, it is possible to record the DTT
programme.Refer to
AV2 and 3 can be connected to the equipment with Composite/RGB/Audio input, and Composite/Audio output.
INPUT Composite/RGB/Audio
IN
OUTPUT Composite/Audio
OUT
INPUT
(AV1)
INPUT
(AV1)
26 27 about "Scart Output" in Setup menu.
INPUT
(AV2)
INPUT
(AV2)
OUT
(Recording Device)
IN
OUT
(Recording Device)
IN
[Example]
VCR
DVD player
Set-Top Box
[Example]
VCR
[Example]
VCR
DVD player
Set-Top Box
[Example]
VCR
15