Odu; Csat Transceiver Menus - Comtech EF Data CDM-570L Installation And Operation Manual

CDM-570/570L Satellite Modem with Optional IP Module
Appendix F
Util

ODU

The ODU menu item is described in this section, in detail.
F.3.2 ODU
Transceiver Control:
Disable Enable (
Disable
Enable
F.3.3

CSAT Transceiver Menus

F.3.3.1 (ODU,ENABLE) System Type
Select ODU System Type:
Stand-Alone 1:1 (
Stand-Alone should be selected when the Modem is linked via the Rx IF cable to a single
Comtech EF Data ODU. Selecting Stand-Alone for a CSAT will take the user to the
menu shown in paragraph F.2.3.8. If the modem detects a KST, the user will be taken to
the menu shown in paragraph F.2.4.1.
1:1 should be selected when the Modem is linked to a redundant CSAT system via
connection between the Rx IF and the ODU Redundancy Controller Box. Selecting 1:1
will take the user to the menu shown next.
F.3.3.2 (ODU,ENABLE) 1:1
Monitor/Control:
CSAT#2
Use the
Selecting ODU#1 or ODU#2 will take the user to the menu of paragraph F.2.3.8.
Selecting REDUNDANCY-BOX will take the user to the following menu.
(Utility) This menu branch permits the user to perform miscellaneous
functions, such as setting the Real-time clock, adjusting the display
brightness, etc.
(Outdoor Unit). This permits the user to monitor and control a
Comtech EF Data RF Transceiver (CSAT or KST-2000A/B), if
connected.
◄ ►,
This menu item turns OFF the FSK link to the ODU
This menu item turns ON the FSK link to the ODU
◄ ►,
CSAT#1
◄ ►,
Red-Box (
◄ or ► arrow keys to select the menu option, then press ENT.
ENT)
ENT)
ENT)
F–3
Revision 4
MN/CDM570L.IOM