* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Fold back matching 4 corners.
Prepare the metal plate bend
HDD Thermal Plate
Do not bend it at a sharp
angle to put natural R.
To the level of attaching
closely in this range
(10)
Attach the HDD Cushion (Yellow)
Attach the HDD Cushion (Black)
Attach the HDD thermal Plate
*Ensure the direction is right. (lateral)
9-33
When attaching HDD Cushion Plate and HDD Cushion (Black),
set the bending part of the metal plate up.
1 2
Longer Direction
Attach the HDD Cushion (Yellow)
Put the edge on the same line.
Difference:
Keep the space to secure the air vent.
1 2
HDD Cushion
(Black)
Metal Plate
1