Panasonic CF-30CTQAZ1 TOUGHBOOK Service Manual page 42

Assembly of LAN, Modem and MDC
Pass the Cable to the back
from the hole of the A side.
LAN Cable
is installed.
Modem Cable
is installed.
Assembly of Main PCB
Insert the connector wrapped with the
sheet into the connector on the board.
Cable SATA Signal Insertion
Safety Working
1 2
Sheet wrap
Insert the FFC of the card
connector into the connector
on the main board.
Do not insert the connector incompletely.
(Note: Insert diagonally.)
Insert the FFC of the card connector into
the connector on the main board.
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Tighten of
Screw
Modem LAN Case
Tighten of
is installed.
Screw
Tighten of
Tighten of
MDC
Screw
Screw
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Order of fixing
Screw Screw
5 1
15 1
Attach space
Attach the DMD Cable Sheet
Process the cable and cover
(Remove 2 places)
with MDM Cable Sheet
Match to the edge of the Connector. 1
Safety Working
Bend the cable avoiding the connector.
Connect the LAN cable.
9-20
Separate from the coil.
Cable Coil
Safety Working
Attach the PET Sheet
0 1
0 1
Put the cable in a U-shape into the intermediate
chassis aperture next to the Connector.
Safety Working