9.1.14. Removing the Palm Top Cover Sheet,
Palm Top Cover, Touch Pad Adhe-
sion Seat, Touch Pad, Touch Pad SW
Knob, LED PCB and SW LED PCB
<N4>
<N4>
<N4>
<N4>
LED PCB
Touch Pad SW Knob
Touch Pad
SW Knob In
Hole 1
Hole 2
1. Remove the Palm Top Cover sheet.
2. Remove the 5 Screws <N4>, and remove the Palm Top
Cover.
3. Remove the Touch Pad Adhesion seat.
4. Remove the Touch Pad.
5. Remove the Touch Pad SW knob and Touch Pad SW Knob
in.
6. Remove the LED PCB.
7. Remove the PW LED Sheet.
8. Remove the Screw <N5>, and remove the SW LCD PCB.
Screws <N4>: DRQT26+D3FKL
Screws <N5>: DRQT26+D4FKL
Palm Top Cover Sheet
Palm Top Cover
Touch Pad Adhesion Seat
PW LED Sheet
Touch Pad
<N5>
PW LED
PCB
SW LED
PCB
9.1.15. Removing the Handle and Power SW
<K2-41>
WM SW
<K2-42>
Power
SW
1. Remove the 2 Screws <K2-41>, and remove the Handle
Base L and R.
2. Remove the Handle.
3. Remove the 2 Screws. <K2-42>
4. Remove the WM SW and Power SW.
Screws <K2-41>: DRSN4+6FKLT
Screws <K2-42>: DXQT26+D4NLT
9-8
Handle Base L
Handle Base R
<K2-41>
Handle