9.2.
Reassembly Instructions
9.2.1.
Attention when CF-30 series is repaired
• Please execute writing BIOS ID when you exchange the Main Board.
• Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.
9.2.2.
Setting the Antenna PCB L and R
1. Set the Antenna PCB L and R using the 2 Screws. <N2>
2. Fix the W-LAN ANT Cover L and R using the 4 Screws.
<N2>
Screws <N2>: DRHM5054XA
Arranging the Antenna L and R Cables
Safety Working
Attach the Cable Tape
Match to the corner.
Coming off the tape is allowed.
Insert the Cable between the pins.
X
Attach it fitting to the corner.
Match to the corner.
Put it along the inside of boss on X part.
X
Cable color : black
X
X
Tighten of Screw
Place the Antenna Main
W-LAN ANT Cover L
Antenna PCB L
<N2>
<N2>
<N2>
<N2>
<N2>
W-LAN ANT Cover R
Insert the Cable between the pins.
Cable color : grey
Fit only this part to the groove.
Match it to the protrusion side and
attach it between the bosses.
Place the Antenna Sub
9-11
LCD Rear Cabinet Ass'y
<N2>
Antenna PCB R
X
Safety Working
X
Attach the Cable Tape
X
Attach the Rear
Screw Sheet
X
Match it to the concave side and
attach it between the bosses.
Safety Working
Attach the Cable Tape
Tighten of Screw