Table of Contents
Advertisement
Remote Start Feature Programming
One Chirp
Button
One LED Pulse
(Default Setting)
10 Minute Run Time
Factory Alarm Disarm
when trunk release
(CH#3) is activated
Constant Parking Light
Output When Running on
Remote Start
-
Press
to Activate Remote Start
Button
One Chirp, LED One Pulse
(Factory Default Setting)
+
Turbo Timer Control
Function is Off.
The alarm can not be armed
while the engine is running.
Four Chirps, LED Four Pulses
Button
Built-in Turbo Timer Control is
Active
Press the (
+
) buttons
before removing the ignition key
+
to activate the 1 minute Turbo
timer control. The alarm system
can be armed and the shock
sensor will be bypassed.
One Chirp
Button
LED One Pulse
(Factory Default Setting)
3 Hour Time Start
+
Step 4
Exit Programming
O FF
22
(continued)
Step 3
(continued)
Two Chirps
Three Chirps
Two LED Pulses
Three LED Pulses
20 Minute Run Time
30 Minute Run Time
Without this Feature
Flashing Parking Light
Output When Running
on Remote Start
-
Press
Press
to Activate Remote Start
to Activate Remote Start
Two Chirps, LED Two Pulses
The vehicle has an aftermarket
turbo timer installed.
The alarm system can be armed
with the engine running. The
shock sensor will be bypassed
as long as the engine is running.
Five Chirps, LED Five Pulses
Built-in Turbo Timer Control is
Active
Press the (
+
) buttons
before removing the ignition key
to activate the 3 minute Turbo
timer control. The alarm system
can be armed and the shock
sensor will be bypassed.
Two Chirps
Three Chirps
LED Two Pulse
LED Three Pulse
2 Hour Time Start
Turn On the Ignition
3 long chirps & 3 flashes of the
parking lights will confirm exit of
the programming mode.
Four Chirps
Four LED Pulses
5 Minute Run Time
Three Chirps, LED Three Pulses
The vehicle has an aftermarket
turbo timer installed.
the alarm system can be armed
with the engine running. The
shock sensor will be bypassed
for 3 minutes.
Six Chirps, LED Six Pulses
Built-in Turbo Timer Control is
Active
Press the (
+
) buttons
before removing the ignition key
to activate the 5 minute Turbo
timer control. The alarm system
can be armed and the shock
sensor will be bypassed.
Four Chirps
LED Four Pulse
Note: Waiting 15 seconds after the
last command will also cause the
system to automatically exit the
programming mode.
Advertisement
Table of Contents
