Related Manuals for Marksman MARKSMAN X11
Summary of Contents for Marksman MARKSMAN X11
- Page 1 Owner’s Manual Model: X11 For Technical Assistance, please call (800) 638-3600, or visit www.magnadyne.com...
-
Page 2: Table Of Contents
Shut Down Input for Remote Starter ........ -
Page 3: Introduction
Introduction Congratulations on your purchase of a quality Marksman automotive security and remote start system. Marksman security products have been designed to provide the consumer with a technologically superior product with years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Marksman security and remote start system. -
Page 4: Lcd Transmitter Operation
LCD Transmitter Operation Transmitter Button Arm and Activate Hidden Alarm Function Hold for 3 Seconds Hold for 2 Seconds Two Step Door Unlock &Disarm Alarm Activate or Turn Off the Remote Start System Function Locks Doors & Arms System Arm and Bypass the 2 Stage Shock Sensor (Zone 4) Arm and Bypass the 2nd Sensor (Zone 6) -
Page 5: Chirp Indicators
LCD Display Transmitter Operations Transmitter Button System Trigger Record Check SET SET Monitor Interior Temperature Chirp Indicators Chirp 1 Chirp 2 Chirps 3 Chirps 4 Chirps 2, 3, 6 Chirps Parking Light Flash 1 Flash 2 Flashes 3 Flashes 2 - 3 - 6 Flashes Constant On System Function System Status Check... -
Page 6: Led Display
LED Display Slow Flashing Fast Flashing On Solid 1 Flash - Pause 2 Flashes - Pause 3 Flashes - Pause 4 Flashes - Pause 5 Flashes - Pause 6 Flashes - Pause System Characteristics Siren/Horn 1. Arming 1 or 3 Chirps 2. -
Page 7: Security Operation Active Arming: Lock And Arm
Manual Arming: Lock and Arm 1. Press the button on the transmitter. 2. The siren will chirp once and parking lights will flash once indicating that the system is now armed. The vehicle door will lock upon arming when interfaced with the security system. System Armed Door Ajar Door Ajar / Defective Sensor Reminder... -
Page 8: Manual Disarming: Unlock And Disarm
Automatic Arming: Lock and Arm Automatic Arming with Passive Door Locking The vehicle doors will automatically lock after the automatic arming cycle has been completed. Automatic Arming Bypass While the system is in disarmed mode, press the with one chirp and the LED will turn “ON”. The security system will remain in this mode for as long as you wish. -
Page 9: Remote Valet Mode
Disarming: Unlock and Disarm Two Steps Door Unlock This feature will independently unlock the drivers door only when disarming the security system. Pushing the button a second time within 3 seconds will unlock the other doors. Automatic Rearm (Must be Programmed On) If this feature is selected, the security system will automatically rearm itself within 60 seconds after disarming with the remote transmitter. -
Page 10: Remote Vehicle Locator System
Progressive Remote Vehicle Locator System Note: The remote vehicle location system is active 30 seconds after the alarm is armed. 1. Press the button to active the vehicle locator system. The horn/siren will beep 2 times and the parking lights will flash 3 times. This operation will repeat a second time. 2. -
Page 11: Anti-Car Jacking
Trigger the System (continued) LCD Transmitter Melody Sound When the Security System is triggered, it will alert the user with flashing icons on the LCD Display and audible melody sound. To stop the melody sound, press any button on the LCD transmitter. LCD Transmitter Clear the Flash Icon and Melody Sound When the Security System is triggered, the LCD screen will alert the user through melody sound and flashing icons. -
Page 12: System Status Check
Anti-Car Jacking (continued) Trigger the Anti-Car Jacking Mode Three Timer circuits will function as follows: First Timer Circuit 1. 50 seconds after the car jacking mode has been activated, the siren will begin to sound for 15 seconds. 2. During the 15 second activation period, you will be alerted to push the valet switch once to turn off the car jacking feature. -
Page 13: Driver Lcd Transmitter Paging
Driver LCD Transmitter Paging It is useful in the event that someone wants to page the driver of the parked vehicle. (Optional) Inside the Vehicle Paging With the ignition switch in the "OFF" position, press the valet switch for 2 seconds to page the driver. -
Page 14: Channel 5 Output
Channel 5 Output Press and hold the Channel 6 Output Press and hold the Channel 7 Output: (Default Setting = Defrost Control) Press and hold the Note: If Channel 7 has been programmed for defrost operation it will not function from the transmitter. button at the same time to activate the Channel 5 output. -
Page 15: Remote Starter Operation
Remote Start Operation User Warnings As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of reach of children. 2. DO NOT leave anyone in the vehicle while running on remote control. 3. -
Page 16: Quick Stop Operation
Remote Start Operation Quick Stop Feature This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock/arm the vehicle for short periods of time. This will keep the engine running for climate controls to stay on. 1. -
Page 17: Turn Off Remote Start
3. Press the vehicle’s brake pedal, the engine will stop running and the parking lights turn off to indicate the engine has stopped. Shut Down Input for Remote Starter If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately: 1. -
Page 18: Remote Lcd Icons
Remote LCD Icons Armed Mode Vehicle is in armed mode Car Jack Mode Car jacking mode is activated Remote Transmission You are transmitting the signal to the control unit Hood Trigger Hood is illegally opened (Zone 1) Trunk Trigger Trunk is illegally opened (Zone 2) Door Open Warning Doors are illegally opened (Zone 3) -
Page 19: Programming The Lcd Transmitter
Programming the LCD Transmitter Button Description LCD Screen Lamp Turns ON for Five Seconds Timer Programming Mode Power Save Mode SET (3X) Clear the Flash Icon and Melody Sound on the LCD Screen SET & LOCK Button Lock Enabled/Disabled SET & UNLOCK Melody/Vibrate Mode Program Count Down Timer (10 m, 20 m, 30 m, 1 hr, 1.5 hr, 2 hr) - Page 20 Programming of the LCD Transmitter Stop the Trigger Melody While triggering the alarm, the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the transmitter to stop melody sound only. Button Lock Use this mode to disable the transmission function of the remote control temporarily to prevent any inadvertent pressing of buttons.
-
Page 21: Timer Setting
Clock and Timer Setting Step Button Press and Hold SET Button for 3 Seconds Press the SET Button Once Press the SET Button Once Press the SET Button Once Press the SET Button Once Press the SET Button Once Press the SET Button Once Press the SET Button Once... -
Page 22: Replacement Parts Order Form
Replacement Parts TRANSMITTERS BATTERIES DESCRIPTION 5-Button Transmitter for X11 Security System 4-Button Transmitter for X11 Security System **1.5 Volt AAA Lithium Battery Highly Recommended *1.5 Volt AAA High Capacity Digital Camera Battery Suggested 1.5 Volt AAA Alkaline Battery Minimum CR2032 - 3 Volt Lithium Battery (2 pcs.) Models: Radio Shack: #23-162 Duracell: #DL2032... - Page 23 Please give a shipping address where this order may be delivered between the hours of 9 am and 5 pm weekdays. If UPS is unable to deliver, your order will be returned and additional shipping charges will be required. Mail to: Magnadyne Corporation ATTN: Consumer Parts Sales P.O.
-
Page 24: Warranty
Limited Lifetime Warranty Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.